It's not even true when it's windy and sunny. Repair costs for those fucking eyesore windmills is so high, that the liberal retards ignore it to try and make wind look cheaper. In real terms wind is by far the worst possible means of power generation, even if you choose to ignore the unreliability.
We'd be better off burning wood than using windmills.
From what I recall from reading about domestic installations, the issue is the inverter, to flip the DC voltage from the panels over to mains AC. Solar might be economical for a while, but once the inverter needs replacement you're basically look at most of the cost of the system all over again.
Windmills could at least potentially use an AC generator, but I presume there's other electronics in there, as otherwise you're looking at some weird mechanical system to force a windmill generator to run at 50Hz, matching phase to the grid. So again, expensive electronics boxes.
And that's before we get to the issue that windmills are basically impossible to recycle. Those massive aerofoil blades are tough, to the point that while it's theoretically possible to recycle them, hardly anybody bothers.
I know an engineer that designs the blades and has worked on maintenance in the past too. They actually do use a mechanical system to regulate the speed on most modern windmills. There are brakes as well as mechanisms to adjust the pitch of the blades to gather more/less wind. If you see a bunch of windmills, watch, they are always the same speed.
The blades are mostly fiberglass and balsa wood. I'm not sure that many useful materials could be taken out of them. The posts are steel, but if I had to guess from my own industry they get abandoned in place when they are end of life. It likely costs more to decommission them than the materials are worth, and spending expense $ on such projects looks bad to pretty much any financial report for a public traded company, so it never gets done.
I'll have to ask sometime. I have a feeling that's one of those problems that seems complicated but would have some stupidly simple solution that would make me feel dumb for not thinking of it.
It's not even true when it's windy and sunny. Repair costs for those fucking eyesore windmills is so high, that the liberal retards ignore it to try and make wind look cheaper. In real terms wind is by far the worst possible means of power generation, even if you choose to ignore the unreliability.
We'd be better off burning wood than using windmills.
From what I recall from reading about domestic installations, the issue is the inverter, to flip the DC voltage from the panels over to mains AC. Solar might be economical for a while, but once the inverter needs replacement you're basically look at most of the cost of the system all over again.
Windmills could at least potentially use an AC generator, but I presume there's other electronics in there, as otherwise you're looking at some weird mechanical system to force a windmill generator to run at 50Hz, matching phase to the grid. So again, expensive electronics boxes.
And that's before we get to the issue that windmills are basically impossible to recycle. Those massive aerofoil blades are tough, to the point that while it's theoretically possible to recycle them, hardly anybody bothers.
I know an engineer that designs the blades and has worked on maintenance in the past too. They actually do use a mechanical system to regulate the speed on most modern windmills. There are brakes as well as mechanisms to adjust the pitch of the blades to gather more/less wind. If you see a bunch of windmills, watch, they are always the same speed.
The blades are mostly fiberglass and balsa wood. I'm not sure that many useful materials could be taken out of them. The posts are steel, but if I had to guess from my own industry they get abandoned in place when they are end of life. It likely costs more to decommission them than the materials are worth, and spending expense $ on such projects looks bad to pretty much any financial report for a public traded company, so it never gets done.
Yeah, the constant-speed thing has been available since ... well, since steam engines, really, hasn't it? The early ones had regulators for that.
Matching the phase of the grid was the major bit of concern, unsure how you'd do that mechanically.
I'll have to ask sometime. I have a feeling that's one of those problems that seems complicated but would have some stupidly simple solution that would make me feel dumb for not thinking of it.